Brickle Strip

The best way to keep foxes out of your garden is to prevent them getting in in the first place. The spikes are designed to give maximum discomfort with minimum harm. Based on the original Prickle Strip design.


Made from weather resistant polypropylene, Brickle Strip is easily attached to the top of a brick wall or ledge with glue, nails or screws. Can also be used on tree branches or sheds. Easy to cut and drill more holes if required.


Comes in strips 50cm (1ft 71/2 inches) long by 10cm wide (3 3/4 inches wide) double the width of the standard Prickle strips. The cone shaped spikes are also taller at 2.5cm (1inch) with 4 rows across (80 cones per 50cm strip). The strips are hinged (see picture below) to allow better fit to curved surfaces.


Also a very effective cat and human intruder deterrent, seen on BBC's 'Beat the burgler'.


Manufactured in Terracotta (red brick).

Brickle Strip

50 Centimeters
  • Many glues and adhesives will not adhere to polypropylene - use Pink Grip Adhesive or screws / nails.

    Trim to size using a suitable saw. Curves and bends can be formed by immersing in very hot water. Brickle Strip can also be easily cut (using scissors or a knife) to a double or single row strip using the hinge grooves as a guide.